Utilizing a dull blade or the erroneous kind of blade can cause the bandsaw to slice through workpieces gradually. The blade will likewise move gradually through the workpiece assuming the blade is introduced mistakenly. A weak drive engine can likewise cause the bandsaw to cut gradually.
To start with, check the establishment of the bandsaw blade. The blade teeth ought to confront descending reinstall the blade appropriately assuming the blade teeth face up. Assuming that you have the blade introduced accurately however you need to push hard on the workpiece while cutting and the blade turns during cutting, then, at that point, the blade is probably going to dull. Supplant the blade when it’s dull.
Utilize the right kind of blade for the workpiece material that you’re cutting. For instance, utilize a 6 TPI (teeth per inch) saw blade while cutting pine wood and other delicate material rather than a 14 TPI blade on the grounds that a blade with fewer teeth will slice through delicate material quicker than a blade with more teeth.
A weak drive engine dials back when the blade slices through a workpiece so supplant the drive engine on the off chance that it will not keep up with the right speed while cutting.
Read more about Why Does Bandsaw Cut To The Left?